Redding .311-inch Titanium Nitride Bushing

The Redding .311-inch Titanium Nitride Bushing (Redding part no. 76311) is a 73-style neck sizing bushing finished with a titanium nitride coating over hardened steel, sized to control cartridge neck diameter to .311 inch. The TiN coating drops friction between the bushing and the case neck during sizing, so brass slides through smoother with less drag and less wear on the bushing itself over a high round count. It drops into the same Redding-style bushing neck sizing die body as Redding’s standard steel bushings, giving precision handloaders a low-friction option for high-volume neck sizing.

Key Specifications

• Sizes cartridge necks to .311 inch, the exact diameter that sets neck tension on the loaded round.
• Finished with a titanium nitride coating over the steel body to cut friction during sizing.
• Lower friction means less case-neck drag and lubricant buildup compared to an uncoated bushing.
• Built to the 73-style bushing profile, so it drops straight into a Redding-style bushing neck sizing die body.
• Lets handloaders swap bushings to change neck tension without buying a new die for every tension setup.

Frequently Asked Questions

What diameter does this bushing size to? This bushing sizes cartridge necks to .311 inch, letting you set neck tension precisely for your brass and bullet combination.

What does the titanium nitride coating do? It reduces friction between the bushing and the case neck during sizing, which means smoother operation and less bushing wear than an uncoated steel bushing.

Buy the Redding .311-inch Titanium Nitride Bushing

If you’re sizing a high volume of brass, the lower friction of a TiN bushing means a smoother press stroke and a bushing that holds its diameter longer. This Redding bushing pairs with the rest of your reloading dies setup, so order it from our Lubbock, Texas gun shop for fast shipping straight to your door.