Redding .288-inch Neck Sizing Bushing

Reloaders chasing tighter neck tension and better bullet-to-case consistency turn to bushings like this Redding .288-inch Neck Sizing Bushing (Redding part no. 76288). Rather than resizing the entire neck down and then expanding it back up, a bushing sizes the neck to a specific outside diameter in one pass, giving you direct control over how firmly the case grips the bullet. Redding offers this bushing across dozens of diameters so precision shooters can dial in the exact fit their brass and bullet combination needs. It drops into any Redding bushing-style die body already on the bench.

Key Specifications

• Bushing diameter is .288-inch, machined to size the case neck to that exact outside dimension.
• Body material is heat-treated steel, chosen for dimensional stability under repeated sizing strokes.
• Bushing surface carries a titanium nitride coating that increases surface hardness and cuts friction during sizing.
• Sold as a single bushing, letting you build a bushing set tailored to your own brass and bullet combination.
• Shipping weight is approximately 0.013 lb, reflecting its small, compact size.
• This bushing belongs to Redding’s neck-sizing bushing line, which spans roughly .17 to .338 caliber, letting you assemble a matched set across calibers.

Frequently Asked Questions

What diameter is this bushing? This is a single Redding neck sizing bushing machined to a .288-inch outside diameter, sized to size the case neck to that exact dimension.

Does this bushing fit any sizing die? It is built to fit Redding bushing-style sizing dies, which accept interchangeable bushings so you can match neck tension to your specific brass and bullet combination.

Buy the Redding .288-inch Neck Sizing Bushing

Pick up the Redding .288-inch Neck Sizing Bushing from our Lubbock, Texas gun shop for fast, insured shipping straight to your reloading bench. Browse the rest of our other reloading equipment selection to round out a bushing die setup built around the exact neck tension your loads need.