Redding E-Z Feed Shell Holder #12

The Redding E-Z Feed Shell Holder, Size #12 (part no. 11012), is a press-mounted shell holder cut to Redding’s own #12 size specification. Its E-Z Feed profile is scalloped around the rim opening so you can drop a case in and pull it back out with one hand, which speeds up repetitive sizing and priming sessions. It snaps into the ram of any standard single-stage or turret press in place of the stock holder. Reloaders who already know which of their cartridges calls for a #12 holder use this exact part number to replace a worn or missing holder.

Key Specifications

• Marked Size #12 in Redding’s shell holder numbering system, so it matches only the cartridges rated for that number.
• The E-Z Feed profile is scalloped for easier one-hand case insertion and removal at the press.
• Snaps into the ram of a standard single-stage or turret press in place of the stock shell holder.
• Machined from steel to hold its grip on the case rim through repeated full-length or neck-sizing strokes.
• A press-type accessory, sold as the shell holder only and not bundled with a die or press.
• Weighs approximately 0.7 oz shipped, light enough to keep several on the bench or in a range bag.

Frequently Asked Questions

What does Size #12 mean? It is Redding’s own shell holder size number; you match #12 to whichever of your cartridges is rated for that number in Redding’s shell holder chart.

Does this work in any press? It fits standard single-stage and turret presses that accept a normal shell holder, not just Redding presses.

Buy the Redding E-Z Feed Shell Holder #12

Replace or add a Size #12 shell holder to your reloading bench. Order from our reloading equipment lineup and our Lubbock, Texas team can help you confirm it is the right size number for your cartridge.