RCBS Semi-Wadcutter Pistol Bullet Mould, Double Cavity, .358 in, 158 gr

The RCBS Semi-Wadcutter Pistol Bullet Mould (brand part no. 82065) is a double-cavity mould that casts a semi-wadcutter bullet, with a sharp-shouldered nose that punches a clean hole in paper targets while still feeding reasonably well, true to .358 in diameter at 158 gr. Like every RCBS mould, the blocks are machined from solid cast iron to exact specifications, so bullet casters get clean, consistent castings session after session rather than fighting flashing or short-fills. It’s built for handloaders who cast their own lead bullets rather than buying jacketed or plated projectiles, and it drops straight into any standard mould handle setup.

Key Specifications

• .358 in is the finished bullet diameter this mould casts to
• 158 gr is the approximate weight of the bullet this double-cavity mould produces
• Semi-Wadcutter Design means this mould casts a semi-wadcutter bullet, with a sharp-shouldered nose that punches a clean hole in paper targets while still feeding reasonably well
• Solid Cast Iron blocks are machined to exact specifications for clean, repeatable castings
• Precision-Ground Square blocks mate tightly together before machining, so the two halves of the mould align consistently cast after cast
• 3/16-Inch Steel Sprue Plate is held firmly in place with tempered steel spring washers and screws
• Steel Alignment Pins keep the mould blocks perfectly mated even after years of heavy use
• Double-Cavity design casts two bullets per pour instead of one, cutting casting time roughly in half

Frequently Asked Questions

Are handles included with this mould? No, RCBS sells mould handles separately, so this mould can be paired with whichever handle set you already own or prefer.

What bullet does this mould cast? A double-cavity .358 in 158 gr bullet — a semi-wadcutter bullet, with a sharp-shouldered nose that punches a clean hole in paper targets while still feeding reasonably well.

Does this mould fit standard RCBS handles? Yes, it uses RCBS’s standard mould block pattern and accepts any standard RCBS handle set.

Buy the RCBS Semi-Wadcutter Pistol Bullet Mould

For handloaders casting their own .358 in bullets, this RCBS mould delivers the clean, repeatable fill quality that turns raw lead into consistent, shootable ammunition at a fraction of the cost of jacketed bullets. Order from RCBS‘s reloading moulds lineup. Ships fast from a Lubbock, TX gun shop.