Lee Power Deluxe Quick Trim Adapter

The Lee Power Deluxe Quick Trim Adapter (Lee part no. 90670) is the power head for Lee‘s Quick Trim case-prep system, built to drive whichever caliber-specific Quick Trim die you already run rather than being tied to one chambering itself. Mounted in a power drill or driver, it turns the trim-and-chamfer cycle that’s normally a hand-crank job into a few seconds of work per case, which matters when a reloading session means trimming a full batch of brass instead of just a few rounds. The kit ships with a chip catcher to keep cut brass and chamfer shavings off the bench, plus the deluxe cutter assembly that actually does the trimming once a caliber-specific die is threaded in. Because it’s built around Lee’s interchangeable die system, one adapter can serve every caliber you load, as long as you own the matching Quick Trim die for each.

Key Specifications

• Works across every caliber in Lee’s Quick Trim system — it drives the die, it isn’t caliber-specific itself.
• Converts the standard hand-crank Quick Trim motion to power-drill operation, trimming and chamfering each case in seconds.
• Includes a chip catcher to keep cut brass and chamfer shavings off the bench.
• Includes the deluxe cutter assembly, the cutting head that pairs with your caliber-specific Quick Trim die.
• Ships as a 2-piece kit — the power adapter and the cutter assembly together.
• Trims and chamfers the case mouth inside and out in the same cycle, with no separate deburring step.
• At roughly 3.75 in. overall, it’s sized to run comfortably in a hand drill or driver.
• Shipping weight is about 0.21 lb for the adapter and cutter together.
• Like the rest of Lee’s lineup, it’s manufactured in the USA.

Frequently Asked Questions

Does this include a caliber-specific die? No — this is the power adapter and cutter assembly only. You’ll still need the Quick Trim die for each caliber you load.

Can I still trim by hand with this installed? It’s built to run in a power drill or driver for speed; Lee’s standard Quick Trim trimmers cover hand-crank use if you’d rather not power it.

Buy the Lee Power Deluxe Quick Trim Adapter

Add the Power Deluxe Quick Trim to your bench to turn case trimming and chamfering from a hand-crank chore into a few seconds per case. Order it from our Lubbock, Texas gun shop for quick, insured shipping, and browse our case preparation selection for the caliber-specific dies it runs.