The Odin Works 1-3/16 Inch Crowfoot Wrench (brand part no. CROWFOOT1316) is a jumbo crowfoot wrench built for installing Odin Works‘s Ragna forend on an AR-style rifle, and it also fits any other barrel nut that uses the same 1-3/16 inch wrench size. It uses a half-inch drive and is sized to torque the barrel nut to the manufacturer’s specified 40 to 50 foot-pounds, giving an armorer the leverage and fit a generic wrench cannot match. It is machined from steel to hold up to the repeated torque loads a barrel nut wrench sees in regular shop use.

Key Specifications

• 1-3/16 Inch Jumbo Crowfoot Size Sized for Odin Works’ Ragna forend barrel nut and other barrel nuts sharing this wrench size.
• 1/2 Inch Drive Uses a half-inch drive for compatibility with standard torque wrenches.
• Torques to 40-50 ft-lbs Built to torque the barrel nut to the specified 40 to 50 foot-pounds.
• Steel Construction Machined from steel to handle repeated torque loads.

Frequently Asked Questions

What forend is this wrench built for? It is sized for Odin Works’ Ragna forend barrel nut, and also fits any other barrel nut using a 1-3/16 inch wrench.

What torque should the barrel nut be set to? Odin Works specifies torquing the barrel nut to 40 to 50 foot-pounds using this wrench.

Buy the Odin Works 1-3/16 Inch Crowfoot Wrench for Ragna Barrel Nuts

Order this Odin Works crowfoot wrench from our Lubbock, Texas gun shop for fast, direct shipping to your next forend install. See the rest of our gunsmithing tools and gunsmith supplies.