Lee Pro 4 20 lb Melting Pot with Adjustable Mould Guide, 110V

The Lee Pro 4 20 lb Melting Pot with Adjustable Mould Guide, 110V (Lee part no. 90947) is a high-capacity lead pot built for bullet casters running steady casting sessions rather than small test pours. Lee Precision gives this pot a large-diameter design that holds roughly 20 pounds of lead and 3 3/4 inches of clearance under the spout, enough for virtually any brand of bullet or sinker mold, plus an adjustable mould guide that positions any mold quickly and accurately under the spout for pouring. The pot uses Lee’s patented high-efficiency design with a dependable remote-sensing thermostat, now housed in a dust-tight enclosure, and a long-life 700-watt tubular heating element for quick melting and fast recovery between pours. A micro-adjustable flow control valve and a front-mounted, low-maintenance, replaceable valve spout let you dial in and reseat flow with just a screwdriver. It runs between 450 and 900 degrees Fahrenheit, with 650 degrees a typical starting point for good fill-out at the lowest workable temperature.

Key Specifications

• Melts approximately 20 lbs of lead at a time.
• Runs on 110-volt power with a 700-watt tubular heating element for quick melting and fast recovery.
• Provides 3 3/4 inches of spout clearance, fitting virtually any brand of bullet or sinker mold.
• Includes an adjustable mould guide for quickly and accurately positioning a mold under the spout.
• Uses a dependable remote-sensing thermostat housed in a dust-tight enclosure.
• Features a micro-adjustable flow control valve and a front-mounted, replaceable valve spout.
• Operating range runs from 450 to 900 degrees Fahrenheit, with 650 degrees a typical starting point.

Frequently Asked Questions

What temperature range does this pot reach? 450 to 900 degrees Fahrenheit, with 650 degrees commonly used as a starting point for good fill-out.

Does the mould guide come included? Yes, an adjustable mould guide is built into this pot for quickly positioning a mold under the spout.

What voltage does this pot need? 110 volts.

Buy the Lee Pro 4 20 lb Melting Pot with Adjustable Mould Guide, 110V

Keep a steady bullet-casting session running with this high-capacity Lee pot. Order it from our Lubbock, Texas gun shop, where our full reloading equipment selection ships fast and insured.