Warne Maxima Fixed 16mm Dovetail Scope Ringmount – CZ 527 1-Inch Medium Matte

Warne’s Maxima fixed dovetail ringmount (part no. 1B1M) is machined to the CZ 527’s proprietary 16mm dovetail receiver design, so it mounts directly to the grooved receiver with no separate base needed.

Four Torx T-15 socket cap screws (25 in-lb of torque recommended) permanently attach each ring to the receiver, and a CZ-specific recoil pin gives positive ring-to-receiver engagement.

Key Specifications

• Machined specifically for the CZ 527’s 16mm dovetail receiver.
• Mounts directly to the receiver grooves with no separate base required.
• Four Torx T-15 socket cap screws secure each ring (25 in-lb of torque recommended).
• CZ-specific recoil pin provides positive ring-to-receiver engagement.
• 1-inch ring diameter.
• Medium height, matte finish.
• Permanently attaches to the receiver dovetail once installed.
• Specialty scope ring style built for grooved-receiver rifles.
• Manufactured by Warne.
• Ships at approximately 0.45 lb.

Frequently Asked Questions

Does this ringmount require a separate scope base? No, it mounts directly into the CZ 527’s 16mm dovetail receiver grooves.

Will this fit a CZ 550? No, the CZ 550 uses a wider 19mm dovetail and requires Warne’s separate CZ 550 ring; this version is machined for the 16mm CZ 527 dovetail.

What torque should the ring screws be set to? Warne recommends 25 in-lb of torque on the Torx T-15 socket cap screws.

Buy the Warne Maxima Fixed 16mm Dovetail Scope Ringmount – CZ 527 1-Inch Medium Matte

Order it from Schaefer Defense, see more from Warne, or browse the full Scope Rings lineup for other options.